MB1S Datasheet, PDF - Datasheet Search Engine

Electronic Components Datasheet Search

X

Shortcut	MB1S(132) recommended result.
Match, Like	MB1S(51) EMB1S(4) RMB1S(4) UMB1S(7) FMB1S(1) TMB1S(1) HMB1S(1) MB1SA(1) MB1SK(1) MB1SU(1)
Start with	MB1S(19) MB1S-(12) MB1SA(2) MB1ST(2)
End	MB1S(34) 0MB1S(5) DMB1S(1) 4MB1S(5) 5MB1S(1) 2MB1S(1) 9MB1S(1) 8MB1S(2)
Included	MB1S(26) MB1SU(2) MB1S_(2)

Manufacturer

MB1S Datasheet, PDF

Search Partnumber : Match&Start with "MB1S" - Total : 72 ( 1/4 Page)

Manufacturer	Part #	Datasheet	Description
ON Semiconductor	MB1S	273Kb/5P	Bridge Rectifiers, 0.5 A August, 2021 - Rev. 5
Micro Commercial Compon...	MB1S	51Kb/2P	0.5Amp Single Phase Glass Passivated Bridge Rectifier 50 to 1000 Volts
Compact Technology Corp...	MB1S	50Kb/2P	GLASS PASSIVATED BRIDGE RECTIFIERS
Micro Commercial Compon...	MB1S	117Kb/3P	0.5Amp Single Phase Glass Passivated Bridge Rectifier 50 to 1000 Volts
Multicomp Pro	MB1S	467Kb/3P	Surface Mount Glass Passivated Bridge Rectifier 01/08/23 V1.1
Sangdest Microelectroni...	MB1S	164Kb/4P	Surge overload rating-30A peak
Fairchild Semiconductor	MB1S	173Kb/3P	Bridge Rectifiers
Fairchild Semiconductor	MB1S	140Kb/3P	0.5 Ampere Glass Passivated Bridge Rectifiers
Yea Shin Technology Co....	MB1S	340Kb/2P	MINI SURFACE MOUNT GLASS PASSIVATED SINGLE-PHASE BRIDGE RECTIFIER
RFE international	MB1S	2Mb/3P	Bridge Rectifiers, Surface Mount 02-MAR-2023
Formosa MS	MB1S	213Kb/7P	0.8A Miniature Glass Passivated Single-Phase Surface Mount Bridge Rectifiers-50-1000V
AiT Semiconductor Inc.	MB1S	528Kb/6P	BRIDGE RECTIFIER REVERSE VOLTAGE 100V TO 1000V RECTIFIED CURRENT 0.8A REV1.0
AiT Semiconductor Inc.	MB1S	528Kb/6P	BRIDGE RECTIFIER REVERSE VOLTAGE 100V TO 1000V RECTIFIED CURRENT 0.8A REV1.0
Continental Device Indi...	MB1S	198Kb/3P	SURFACE MOUNT GLASS PASSIVATED BRIDGE RECTIFIERS
Rectron Semiconductor	MB1S	175Kb/6P	VOLTAGE RANGE 50 to 1000 Volts CURRENT 0.5 Ampere SINGLE-PHASE GLASS PASSIVATED SILICON BRIDGE RECTIFIER 2019-08 REV:B
MAKO SEMICONDUCTOR CO.,...	MB1S	125Kb/2P	0.5Amp Single Phase Glass Passivated Bridge Rectifier 50 to 1000 Volts
Nanjing International G...	MB1S	143Kb/2P	MINI SURFACE MOUNT GLASS PASSIVATED BRIDGE RECTIFIERS
Nanjing International G...	MB1S	360Kb/2P	MINI SURFACE MOUNT GLASS PASSIVATED BRIDGE RECTIFIERS
Surge Components	MB1S	409Kb/2P	Miniature Glass Passivated Single-Phase Surface Mount Bridge Rectifiers
Diode Semiconductor Kor...	MB1S	175Kb/2P	SILICON BRIDGE RECTIFIERS

12 3 4

12 3 4

Brief Description of MB1S

The MB1S is a part designation typically used for a single-phase bridge rectifier. It is commonly used for converting alternating current (AC) to direct current (DC) in power supply applications.

Here are some general specifications for the MB1S bridge rectifier:

Maximum Average Forward Rectified Current (Io): Typically around 1 ampere
Maximum Peak Forward Surge Current (IFSM): Typically around 30 amperes (for a specified pulse width and repetition rate)
Maximum Reverse Voltage (VR): Typically around 100 volts
Maximum Forward Voltage Drop (VF): Typically around 1.1 volts at the rated current
Maximum Reverse Current (IR): Typically around 5 microamperes at the rated voltage
Package Type: Typically Miniature Bridge Rectifier (MB) package with four pins

Equivalent for MB1S

MB1S is a single-phase bridge rectifier with a maximum repetitive peak reverse voltage of 1000V and a maximum average forward rectified current of 1A. If you are looking for a replacement for this bridge rectifier, you can consider the following alternatives that have similar specifications:

DB101 - This is a single-phase bridge rectifier with a maximum repetitive peak reverse voltage of 1000V and a maximum average forward rectified current of 1A. It has similar electrical characteristics to the MB1S and is available in a through-hole or surface mount package.

GBJ10005 - This is a single-phase bridge rectifier with a maximum repetitive peak reverse voltage of 50V and a maximum average forward rectified current of 10A. It has a higher current rating than the MB1S, which may be useful for applications that require higher power levels. It is available in a through-hole package.

KBPC1010 - This is a single-phase bridge rectifier with a maximum repetitive peak reverse voltage of 1000V and a maximum average forward rectified current of 10A. It has a higher current rating than the MB1S and is available in a through-hole package.

*This information is for general informational purposes only, we will not be liable for any loss or damage caused by the above information.

Link URL

Does ALLDATASHEET help your business so far? [ DONATE ]

About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link to Datasheet | Link Exchange | Manufacturer List
All Rights Reserved©Alldatasheet.com

Mirror Sites English : Alldatasheet.com  |   English : Alldatasheet.net  |   Chinese : Alldatasheetcn.com  |   German : Alldatasheetde.com  |   Japanese : Alldatasheet.jp
Russian : Alldatasheetru.com  |   Korean : Alldatasheet.co.kr  |   Spanish : Alldatasheet.es  |   French : Alldatasheet.fr  |   Italian : Alldatasheetit.com
Portuguese : Alldatasheetpt.com  |   Polish : Alldatasheet.pl  |   Vietnamese : Alldatasheet.vn
Indian : Alldatasheet.in  |   Mexican : Alldatasheet.com.mx  |   British : Alldatasheet.co.uk  |   New Zealand : Alldatasheet.co.nz

Family Site : ic2ic.com | icmetro.com