SUMMARY DESCRIPTION
The M29F080D is a 8 Mbit (1Mb x8) non-volatile memory that can be read, erased and reprogrammed. These operations can be performed using a single low voltage 5V supply. On power-up the memory defaults to its Read mode where it can be read in the same way as a ROM or EPROM.

FEATURES SUMMARY
■ SUPPLY VOLTAGE
   – VCC = 5V ±10% for PROGRAM, ERASE and READ OPERATIONS
■ ACCESS TIME: 55, 70, 90ns
■ PROGRAMMING TIME
   – 10µs per Byte typical
■ 16 UNIFORM 64Kbyte MEMORY BLOCKS
■ PROGRAM/ERASE CONTROLLER
   – Embedded Byte Program algorithms
■ ERASE SUSPEND and RESUME MODES
   – Read and Program another Block during Erase Suspend
■ UNLOCK BYPASS PROGRAM COMMAND
   – Faster Production/Batch Programming
■ TEMPORARY BLOCK UNPROTECTION MODE
■ COMMON FLASH INTERFACE
   – 64 bit Security Code
■ LOW POWER CONSUMPTION
   – Standby and Automatic Standby
■ 100,000 PROGRAM/ERASE CYCLES per BLOCK
■ ELECTRONIC SIGNATURE
   – Manufacturer Code: 20h
   – Device Code: F1h
■ ECOPACK® PACKAGES AVAILABLE