GENERAL DESCRIPTION
The SAA6713H is a dual input single-chip Thin Film Transistor (TFT) display controller IC with analog VGA and digital DVI 1.0 standard input capabilities. Additionally, the SAA6713H includes a wide range of functions for processing and the measurement of incoming RGB data according to the requirements of an XGA TFT display.

FEATURES
• Integrated triple Analog-to-Digital Converter (ADC) for RGB analog sampling up to 110 MHz
• Integrated PLL for dot clock recovery
• Integrated single channel Digital Visual Interface (DVI)(1) compliant digital serial interface up to 110 MHz dot clock
• Integrated composite sync slicer
• High-bandwidth Digital Content Protection (HDCP)(2)
• Integrated sync-on-green separation
• Support of Super Extended Graphics Adapter (SXGA) input mode
• Independent horizontal and vertical arbitrary ratio up and downscaling
• Video mode detection
• Auto-adjustment support for sampling phase and frequency, picture alignment and colour alignment
• Advanced colour adjustment
• Integrated On Screen Display (OSD) controller with predefined and programmable font and bit-mapped graphics, as well as a hardware overlay cursor
• 10-bit gamma correction
• Support for 6-bit and 8-bit panels by temporal dithering
• Freely programmable output timing supports displays of virtually any manufacturer
• Directly interfaces row and column drivers (TCON), versatile timing generation
• Programmable output pin ordering
• Adjustable output pin ordering
• High-speed I2C-bus interface up to 3.4 Mbits/s
• Event driven interrupt generation for easy interfacing with microcontroller software.