GENERAL DESCRIPTION

The MX29F002T/B is a 2-mega bit Flash memory organized as 256K bytes of 8 bits only. MXICs Flash memories offer the most cost-effective and reliable read/write nonvolatile random access memory. The MX29F002T/B is packaged in 32-pin PDIP,PLCC and 32-pin TSOP(I). It is designed to be reprogrammed and erased in-system or in standard EPROM programmers.

FEATURES

• 262,144x 8 only

• Fast access time: 55/70/90/120ns

• Low power consumption

   - 30mA maximum active current(5MHz)

   - 1uA typical standby current

• Programming and erasing voltage 5V ± 10%

• Command register architecture

   - Byte Programming (7us typical)

   - Sector Erase (16K-Byte x1, 8K-Byte x 2, 32K-Byte x1, and 64K-Byte x 3)

• Auto Erase (chip & sector) and Auto Program

   - Automatically erase any combination of sectors or the whole chip with Erase Suspend capability.

   - Automatically programs and verifies data at specified address

• Erase Suspend/Erase Resume

   - Suspends an erase operation to read data from, or program data to, a sector that is not being erased, then resumes the erase operation.

• Status Reply

   - Data polling & Toggle bit for detection of program and erase cycle completion.

• Sector protection

   - Hardware method to disable any combination of sectors from program or erase operations

   - Sector protect/unprotect for 5V only system or 5V/12V system

• 100,000 minimum erase/program cycles

• Latch-up protected to 100mA from -1 to VCC+1V

• Boot Code Sector Architecture

   - T = Top Boot Sector

   - B = Bottom Boot Sector

• Hardware RESET pin(only for 29F002T/B)

   - Resets internal state machine to read mode

• Low VCC write inhibit is equal to or less than 3.2V

• Package type:

   - 32-pin PDIP

   - 32-pin PLCC

   - 32-pin TSOP (Type 1)

• 20 years data retention