Genaral Description

The AP1014AEC has four drive mode of forward, reverse, brake and standby by 2 channel H-bridge Motor Driver corresponding to operating voltage 7.0V. It is possible to set to the input logic which was suitable for the PWM drive with the SEL terminal. The AP1014AEC layout Nch LDMOS FET in high side and low side in output circuit and realize a small WL-CSP package. Also it has under voltage detection and thermal shutdown circuits. It is suitable for driving various small motor.

Features

Control Supply Voltage                        2.7V to 5.5V

Wide Motor Drive Operating Voltage      2.0V to 7.0V

Maximum Output Current (DC)              1.1A @Ta=25C, 0.8A @Ta=85°C

Maximum Output Current (Peak)            2.0A (Ta=25C, 10ms/200ms)

H-Bridge ON Resistance                       RON (TOP+BOT)=0.35Ω(Typ.)@Ta=25°C

Built-in Under Voltage Detection Circuit   Detect VC Supply Voltage under 2.2V(Typ.)

Built-in Thermal Shut Down Circuit (Tj)    175°C (Typ.)

Junction Temperature                          150°C (Max.)

Package                                            16-pin WL-CSP (1.96mm×1.96mm )