▪ PCIe Gen5 additive phase jitter: 5.8fs RMS
▪ PCIe Gen6 additive phase jitter: 3.4fs RMS
▪ PCIe Gen7 additive phase jitter: 2.4fs RMS
▪ DB2000Q additive phase jitter: 10fs RMS
▪ 12kHz to 20MHz additive phase jitter: 30fs RMS at
156.25MHz
▪ Power Down Tolerant (PDT) inputs
▪ Flexible Startup Sequencing (FSS)
▪ Automatic Clock Parking (ACP) upon loss of CLKIN
▪ Spread-spectrum tolerant
▪ CLKIN accepts HCSL or LVDS signal levels
▪ -40 to +105°C, 3.3V ±10% operation
▪ All devices except RC19002:
• Selectable output slew rate via pin/SMBus
• 4-wire Side-Band Interface supports high-speed
serial output enable and device daisy-chaining
• 9 SMBus addresses plus write protection
• 85Ω or 100Ω (A100 suffix) output impedance
• Pin-selectable slew rate
▪ RC19002: Pin-selectable output impedance