1.1 Features
12345
• Two 30-MSPS 11-bit A/D channels with
programmable gain control
• Supports NTSC (J, M, 4.43), PAL (B, D, G, H, I,
M, N, Nc, 60), and SECAM (B, D, G, K, K1, L)
CVBS, and S-video
• Supports analog component YPbPr video
format with embedded sync
• Ten analog video input terminals for
multisource connection
• Supports analog video output
• User-programmable video output formats
– 10-bit ITU-R BT.656 4:2:2 YCbCr with
embedded syncs
– 10-bit 4:2:2 YCbCr with separate syncs
– 20-bit 4:2:2 YCbCr with separate syncs
– 2x sampled raw VBI data in active video
during a vertical blanking period
– Sliced VBI data during a vertical blanking
period or active video period (full field mode)
• HSYNC/VSYNC outputs with programmable
position, polarity, width, and field ID (FID) AECoutput
• Composite and S-video processing
– Adaptive 2-D 5-line adaptive comb filter for
composite video inputs; chroma-trap
available
– Automatic video standard detection
(NTSC/PAL/SECAM) and switching
– Luma-peaking with programmable gain
– Patented chroma transient improvement
(CTI)
– Patented architecture for locking to weak,
noisy, or unstable signals
– Single 14.31818-MHz reference crystal for all
standards
– Line-locked internal pixel sampling clock
generation with horizontal and vertical lock
signal outputs
– Genlock output RTC format for downstream
• Certified Macrovision™ copy protection
detection
• Available in commercial (0°C to 70°C) and
industrial (−40°C to 85°C) temperature ranges
• Qualified for Automotive Applications (AECoutput
Q100 Rev G − TVP5147M1IPFPQ1 or
TVP5147M1IPFPRQ1)
• VBI data processor
– Teletext (NABTS, WST)
– CC and extended data service (EDS)
– Wide screen signaling (WSS)
– Copy generation management system
(CGMS)
– Video program system (VPS/PDC)
– Vertical interval time code (VITC)
– Gemstar™ 1×/2× mode
– V-Chip decoding
– Register readback of CC, WSS (CGMS),
VPS/PDC, VITC and Gemstar 1×/2× sliced
data
• I2C host port interface
• Reduced power consumption: 1.8-V digital