1 Features
1• DCS-Control™ Topology
• Up to 95% Efficiency
• 17-μA Operating Quiescent Current
• 31mΩ and 23mΩ Power MOSFET Switch
• 2.5-V to 6.0-V Input Voltage Range
• 0.8-V to VIN Adjustable Output Voltage
• Power Save Mode for Light Load Efficiency
• 100% Duty Cycle for Lowest Dropout
• Hiccup Short-Circuit Protection
• Output Discharge
• Power Good Output
• Thermal Shutdown Protection
• Available in 2-mm × 2-mm VSON Package
• For Improved Feature Set, See TPS62085
• Create a Custom Design using the TLV62085 with
the WEBENCH® Power Designer

2 Applications
• Battery-Powered Applications
• Point-of-Load
• Processor Supplies
• Hard Disk Drives (HDD) / Solid State Drives
(SSD)

3 Description
The TLV62085 device is a high-frequency
synchronous step-down converter optimized for small
solution size and high efficiency. With an input
voltage range of 2.5 V to 6.0 V, common battery
technologies are supported. The devices focus on
high-efficiency step-down conversion over a wide
output current range. At medium to heavy loads, the
converter operates in PWM mode and automatically
enters Power Save Mode operation at light load to
maintain high efficiency over the entire load current
range.
To address the requirements of system power rails,
the internal compensation circuit allows a large
selection of external output capacitor values ranging
from 10 μF to 150 μF and above. Together with its
DCS-Control™ architecture, excellent load transient
performance and output voltage regulation accuracy
are achieved. The device is available in a 2-mm × 2-
mm VSON package.