Military Operating Temperature Range
− 55°C to 125°C; QML Processing
High-Performance Floating-Point Digital
Signal Processor (DSP)
SMQ320C32-50 (5 V)
− 40-ns Instruction Cycle Time
− 275 MOPS
− 50 MFLOPS
− 25 MIPS
SMQ320C32-60 (5 V)
− 33-ns Instruction Cycle Time
− 330 MOPS
− 60 MFLOPS
− 30 MIPS
32-Bit High-Performance CPU
16-/32-Bit Integer and 32-/40-Bit
Floating-Point Operations
32-Bit Instruction Word, 24-Bit Addresses
Two 256 × 32-Bit Single-Cycle, Dual-Access
On-Chip RAM Blocks
Flexible Boot-Program Loader
On-Chip Memory-Mapped Peripherals:
− One Serial Port
− Two 32-Bit Timers
− Two-Channel Direct Memory Access
(DMA) Coprocessor With Configurable
Priorities
Enhanced External Memory Interface That
Supports 8-/16-/32-Bit-Wide External RAM
for Data Access and Program Execution
From 16-/32-Bit-Wide External RAM
SMJ320C30 and SMJ320C31 Object Code
Compatible
Fabricated Using Enhanced Performance
Implanted CMOS (EPIC) Technology by
Texas Instruments
144-Pin Plastic Quad Flatpack
(PCM Suffix) 5 V
Eight Extended-Precision Registers
Two Address Generators With Eight
Auxiliary Registers and Two Auxiliary
Register Arithmetic Units (ARAUs)
Two Low-Power Modes
Two- and Three-Operand Instructions
Parallel Arithmetic Logic Unit (ALU) and
Multiplier Execution in a Single Cycle
Block-Repeat Capability
Zero-Overhead Loops With Single-Cycle
Branches
Conditional Calls and Returns
Interlocked Instructions for
Multiprocessing Support
One External Pin, PRGW, That Configures
the External-Program-Memory Width to
16 or 32 Bits
Two Sets of Memory Strobes (STRB0 and
STRB1) and One I/O Strobe (IOSTRB)
Allow Zero-Glue Logic Interface to Two
Banks of Memory and One Bank of External
Peripherals
Separate Bus-Control Registers for Each
Strobe-Control Wait-State Generation,
External Memory Width, and Data Type Size
STRB0 and STRB1 Memory Strobes Handle
8-, 16-, or 32-Bit External Data Accesses
(Reads and Writes)
Multiprocessor Support Through the HOLD
and HOLDA Signals Is Valid for All Strobes

description
The SMQ320C32 is a member of the ’320C3x generation of digital signal processors from Texas Instruments.
The SMQ320C32 is an enhanced 32-bit floating-point processor manufactured in 0.7-μm triple-level-metal
CMOS technology. The enhancements to the ’320C3x architecture include a variable-width external-memory
interface, faster instruction cycle time, power-down modes, two-channel DMA coprocessor with configurable
priorities, flexible bootloader, relocatable interrupt-vector table, and edge- or level-triggered interrupts.