1 Features
1(VS = 5V, TA = 25°C, Typical Values Unless
Specified).
• GBWP 21MHz
• Wide Supply Voltage Range 2.5 V to 22 V
• Slew Rate 12V/μs
• Supply Current/channel 1.15 mA
• Cap Load Limit Unlimited
• Output Short Circuit Current +53mA/−75 mA
• +/−5% Settling Time 400ns (500 pF, 100 mV PP
step)
• Input Common Mode Voltage 0.3 V Beyond Rails
• Input Voltage Noise 15nV/√Hz
• Input Current Noise 1pA/√Hz
• THD+N < 0.05%

2 Applications
• TFT-LCD Flat Panel VCOM driver
• A/D Converter Buffer
• High Side/low Side Sensing
• Headphone Amplifier

3 Description
The LM8262 is a Rail-to-Rail input and output Op
Amp which can operate with a wide supply voltage
range. This device has high output current drive,
greater than Rail-to-Rail input common mode voltage
range, unlimited capacitive load drive capability, and
provides tested and ensured high speed and slew
rate. It is specifically designed to handle the requirements of flat panel TFT panel VCOM driver
applications as well as being suitable for other low
power and medium speed applications which require
ease of use and enhanced performance over existing
devices.
Greater than Rail-to-Rail input common mode voltage
range with 50 dB of Common Mode Rejection allows high side and low side sensing for many applications
without concern for exceeding the range and with no
compromise in accuracy. In addition, most device
parameters are insensitive to power supply variations.
This design enhancement is yet another step in simplifying its usage. The output stage has low
distortion (0.05% THD+N) and can supply a
respectable amount of current (15 mA) with minimal
headroom from either rail (300 mV).
The LM8262 is offered in the space saving VSSOP
package.