1FEATURES
• QML-V Qualified, SMD 5962-7704301VCA,
5962-9950403VCA and 5962-9950403V9B
• Rad-Tolerant: 50 kRad (Si) TID
(5962-9950403VCA and 5962-9950403V9B) (1)
– TID Dose Rate = 0.01 rad/sec (Si)
• Wide Supply Ranges
– Single Supply: 3 V to 32 V
– Dual Supplies: ±1.5 V to ±16 V
• Low Supply-Current Drain Independent of
Supply Voltage: 0.8 mA (Typ)
• Low Input Bias and Offset Parameters
– Input Offset Voltage: 1 mV Typ
– Input Offset Current: 2 nA Typ
– Input Bias Current: 30 nA Typ
• Common-Mode Input Voltage Range Includes
Ground, Allowing Direct Sensing Near Ground
• Differential Input Voltage Range Equal to
Maximum-Rated Supply Voltage: ±32 V
• Open-Loop Differential Voltage Amplification:
100 V/mV Typ
• Internal Frequency Compensation

DESCRIPTION/ORDERING INFORMATION
These devices consist of four independent high-gain frequency-compensated operational amplifiers that are
designed specifically to operate from a single supply over a wide range of voltages. Operation from split supplies
also is possible if the difference between the two supplies is 3 V to 32 V, and VCC is at least 1.5 V more positive
than the input common-mode voltage. The low supply-current drain is independent of the magnitude of the
supply voltage.
Applications include transducer amplifiers, dc amplification blocks, and all the conventional operational-amplifier
circuits that now can be more easily implemented in single-supply-voltage systems. For example, the LM124 can
be operated directly from the standard 5-V supply that is used in digital systems and provides the required
interface electronics, without requiring additional ±15-V supplies.