Product Overview
The Qorvo® QPF4207 is an integrated front end module (FEM)
designed for Wi-Fi 7 (802.11be) systems. The small form factor
and integrated matching minimizes layout area in the
application.
Performance is focused on optimizing the PA for a 5V supply
voltage that minimizes power consumption to allow for systems
that use digital pre-distortion to achieve the highest linear output
power and leading edge throughput for the RF chain.
A coupler with RF output is integrated for DPD feedback training.
Options for alternate routing of the feedback are included with
low loss. For power control a broadrange, constant slope
voltage logarithmic power detector is provided for power control.
The module includes a state to turn on and off, which could
reduce bill of material or give an option to reduce current draw.
The QPF4207 integrates a 2.4 GHz power amplifier (PA), single
pole two throw switch (SP2T), coupler structure and bypassable
multimode low noise amplifier (LNA) into a single device.

Key Features
• 2412 – 2484 MHz
• PSAT = +32 dBm
• Corrected DEVM1
o POUT = +22 dBm MCS13 HE20 -43dB Dynamic EVM
o POUT = +23 dBm MCS11 HE20 -38dB Dynamic EVM
o POUT = +24 dBm MCS8 VHT20 -35dB Dynamic EVM
o POUT = +26 dBm MCS7 HT20 -30dB Dynamic EVM
o POUT = +27 dBm MCS0 HT20 Spectral Mask
Compliance2
• Optimized for +5 V Operation
• DC Power = 1.75 W at +27dBm
• 32 dB Tx Gain
• 1.7 dB Noise Figure
• 15.5/3.5 dB Rx Gain & 7 dB Bypass Loss
• >17 dB 5-7 GHz Rejection on Rx Path
• Integrated RF Coupler & DC Logarithmic Power Detector

Applications
• Access Points
• Wireless Routers
• Residential Gateways
• Customer Premise Equipment
• Internet of Things