GENERAL DESCRIPTION
The ADM1041A is a secondary-side and management IC specifically designed to minimize external component counts and to eliminate the need for manual calibration or adjustment on the secondary-side controller. The principle application of this IC is to provide voltage control, current share, and housekeeping functions for single output in N+1 server power supplies.

FEATURES
   Digital calibration via internal EEPROM
   Supports SSI specification
   Comprehensive fault detection
   Reduced component count on secondary side
   Standalone or microcontroller control

SECONDARY-SIDE FEATURES
   Generates error signal for primary-side PWM
   Output voltage adjustment and margining
   Current sharing
   Current-limit adjustment
   OrFET control
   Programmable soft-start slew rate
   Standalone or microcontroller operation
   Differential load voltage sense
   AC mains undervoltage detection (ac sense)
   Overvoltage protection

INTERFACE AND INTERNAL FEATURES
   SMBus interface (I2C-compatible)
   Voltage-error amplifier
   Differential current sense
   Sense resistor or current transformer option
   Overvoltage protection
   Undervoltage protection
   Overcurrent protection
   Overtemperature protection
   Start-up undervoltage blanking
   Programmable digital debounce and delays
   352-byte EEPROM available for field data
   160-byte EEPROM for calibration
   Ground continuity monitoring

APPLICATIONS
   Network servers
   Web servers
   Power supply control