FEATURES
• Functionality
- Low speed to high speed SPI exchange device
- Logical port (LP) mapping (SPI-3 <-> SPI-4) tables per direction
- Per LP configurable memory allocation
- Maskable interrupts for fatal errors
- Fragment and burst length configurable per interface: min 16 bytes,
max 256 bytes
• Standard Interfaces
- Two OIF SPI-3: 8 or 32 bit, 19.44-133 MHz, 256 address range, 64
concurrently active LPs per interface
- One OIF SPI-4 phase 2: 80 - 400 MHz, 256 address range, 128
concurrently active LPs
- SPI-4 FIFO status channel options:
• LVDS full-rate
• LVTTL eighth-rate
- Compatible with Network Processor Streaming Interface (NPSI)
NPE-Framer mode of operation
- SPI-4 ingress LVDS automatic bit alignment and lane de-skew over
the entire frequency range
- SPI-4 egress LVDS programmable lane pre-skew 0.1 to 0.3 cycle
- IEEE 1149.1 JTAG
- Serial or parallel microprocessor interface for control and monitoring
• Full Suite of Performance Monitoring Counters
- Number of packets
- Number of fragments