DESCRIPTION:
The IDT72T2098/72T20108/72T20118/72T20128 are exceptionally deep, extremely high speed, CMOS First-In-First-Out (FIFO) memories with the ability to read and write data on both rising and falling edges of clock. The device has a flexible x20/x10 Bus-Matching mode and the option to select Single or Double Data clock rates for input and output ports.

FEATURES:
• Choose among the following memory organizations:
    IDT72T2098 - 32,768 x 20/65,536 x 10
    IDT72T20108 - 65,536 x 20/131,072 x 10
    IDT72T20118 - 131,072 x 20/262,144 x 10
    IDT72T20128 - 262,144 x 20/524,288 x 10
• Up to 250MHz Operation of Clocks
    - 4ns read/write cycle time, 3.2ns access time
• Users selectable input port to output port data rates, 500Mb/s Data Rate
    -DDR to DDR
    -DDR to SDR
    -SDR to DDR
    -SDR to SDR
• User selectable HSTL or LVTTL I/Os
• Read Enable & Read Clock Echo outputs aid high speed operation
• 2.5V LVTTL or 1.8V, 1.5V HSTL Port Selectable Input/Ouput voltage
• 3.3V Input tolerant
• Mark & Retransmit, resets read pointer to user marked position
• Write Chip Select (WCS) input enables/disables Write Operations
• Read Chip Select (RCS) synchronous to RCLK
• Programmable Almost-Empty and Almost-Full flags, each flag can default to one of four preselected offsets
• Dedicated serial clock input for serial programming of flag offsets
• User selectable input and output port bus sizing
    -x20 in to x20 out
    -x20 in to x10 out
    -x10 in to x20 out
    -x10 in to x10 out
• Auto power down minimizes standby power consumption
• Master Reset clears entire FIFO
• Partial Reset clears data, but retains programmable settings
• Empty and Full flags signal FIFO status
• Select IDT Standard timing (using EF and FF flags) or First Word Fall Through timing (using OR and IR flags)
• Output enable puts data outputs into High-Impedance state
• JTAG port, provided for Boundary Scan function
• 208 Ball Grid array (PBGA), 17mm x 17mm, 1mm pitch
• Easily expandable in depth and width
• Independent Read and Write Clocks (permit reading and writing simultaneously)
• High-performance submicron CMOS technology
• Industrial temperature range (-40°C to +85°C) is available