Electronic Components Datasheet Search
  English  ▼

X  

All Datasheet Distributor Manufacturer
Shortcut   LM741(113) recommended result.
Match, Like  LM741(20) LM741A(1) LM741C(3) LM741E(1) LM741H(6) LM741I(1) LM741J(5) LM741M(1) LM741N(3) LM741W(1)
Start with  LM741*(88) LM741-*(1) LM741A*(3) LM741C*(34) LM741E*(6) LM741H*(7) LM741I*(3) LM741J*(5) LM741M*(1) LM741Q*(3) LM741W*(3)
End   No Data
Included  *LM741*(1)
Manufacturer


LM741 Datasheet, PDF - National Semiconductor (TI)

Search Partnumber : Match&Start with "LM741" - Select : 25 , Total : 112 ( 1/2 Page)
ManufacturerPart #DatasheetDescription

1 2 >


1 2 >


LM741 Datasheet, PDF [Old version datasheet]

ManufacturerPart #DatasheetDescription
logo
National Semiconductor ...		LM741
213Kb/8P		Operational Amplifier
May 1998
LM741
180Kb/7P		Operational Amplifier
August 2000
LM741A
180Kb/7P		Operational Amplifier
August 2000
LM741AH
213Kb/8P		Operational Amplifier
May 1998
LM741AH/883
180Kb/7P		Operational Amplifier
August 2000
LM741AJ-14
213Kb/8P		Operational Amplifier
May 1998
LM741C
180Kb/7P		Operational Amplifier
August 2000
LM741CH
213Kb/8P		Operational Amplifier
May 1998
LM741CH
180Kb/7P		Operational Amplifier
August 2000
LM741CJ
213Kb/8P		Operational Amplifier
May 1998
LM741CM
213Kb/8P		Operational Amplifier
May 1998
LM741CN
213Kb/8P		Operational Amplifier
May 1998
LM741CN
180Kb/7P		Operational Amplifier
August 2000
LM741EH
213Kb/8P		Operational Amplifier
May 1998
LM741EN
213Kb/8P		Operational Amplifier
May 1998
LM741H
213Kb/8P		Operational Amplifier
May 1998
LM741H
180Kb/7P		Operational Amplifier
August 2000
LM741H/883
180Kb/7P		Operational Amplifier
August 2000
LM741J
213Kb/8P		Operational Amplifier
May 1998
LM741J
180Kb/7P		Operational Amplifier
August 2000

Brief Description of LM741

The LM741 is a classic operational amplifier (op-amp) integrated circuit that has been widely used in analog electronic circuits for many years. It's part of the LM741 series of op-amps and is known for its versatility and ability to perform a wide range of analog signal processing tasks. Here are some key features and specifications of the LM741 op-amp:

Number of Amplifiers: The LM741 is a single operational amplifier, which means it contains one amplifier circuit in a single package.

Voltage Supply: The LM741 typically operates on dual power supplies, with positive (+Vcc) and negative (-Vcc) voltage rails. It is often used with power supply voltages in the range of ±5V to ±18V, but this range may vary depending on the specific model and manufacturer.

Open-Loop Gain: The LM741 has a high open-loop voltage gain, often exceeding 100,000. This makes it suitable for applications where high gain is required.

Input Offset Voltage: The LM741 has an input offset voltage, which is the difference in voltage between the inverting and non-inverting input terminals that can affect the accuracy of the amplifier. Depending on the model, this voltage offset can vary.

Input Offset Current: The input offset current is the difference in current between the inverting and non-inverting input terminals. It can also affect the accuracy of the amplifier and varies with different models.

Slew Rate: The LM741 has a limited slew rate, which is the maximum rate of change of the output voltage in response to a step input signal. It is typically in the range of a few volts per microsecond.

Bandwidth: The LM741 has a limited bandwidth, and the gain-bandwidth product is specified in the datasheet. For example, a gain-bandwidth product of 1 MHz means that the op-amp can provide a gain of 1 at 1 MHz or a higher gain at a lower frequency.

Package: The LM741 is commonly available in an 8-pin dual in-line package (DIP) or other package types.

Applications: The LM741 op-amp is used in various analog circuit applications, including amplifiers, filters, oscillators, voltage followers, voltage comparators, and more.

Equivalent for LM741

The LM741 is a general-purpose operational amplifier (op-amp) widely used in various analog applications. Several op-amps offer similar functionalities and can serve as replacements for the LM741:

LM358:

A dual op-amp with characteristics comparable to the LM741.
Designed for single or dual power supply operation.
Features low power consumption and a large common-mode voltage range.
Suitable for general-purpose applications.
LM148/LM248/LM348:

Quad op-amps with specifications similar to the LM741.
Offer multiple op-amps in a single package.
Provide high gain and wide bandwidth.
Ideal for applications requiring multiple amplifiers.
CA3140:

An op-amp with MOSFET inputs and a bipolar output stage.
Offers high input impedance and fast response.
Pin-compatible with the LM741, with an additional strobe function on pin 8.
Suitable for high-speed and precision applications.
TL071/TL081:

JFET-input op-amps with low noise and high slew rates.
Provide better performance in terms of bandwidth and input impedance compared to the LM741.
May have different pin configurations; verify compatibility with your circuit.
Ideal for audio and high-fidelity applications.

*This information is for general informational purposes only, we will not be liable for any loss or damage caused by the above information.

Link URL



Privacy Policy
ALLDATASHEET.COM
Does ALLDATASHEET help your business so far?  [ DONATE ] 

About Alldatasheet   |   Advertisement   |   Contact us   |   Privacy Policy   |   Link to Datasheet    |   Manufacturer List
All Rights Reserved©Alldatasheet.com


Mirror Sites
English : Alldatasheet.com  |   English : Alldatasheet.net  |   Chinese : Alldatasheetcn.com  |   German : Alldatasheetde.com  |   Japanese : Alldatasheet.jp
Russian : Alldatasheetru.com  |   Korean : Alldatasheet.co.kr  |   Spanish : Alldatasheet.es  |   French : Alldatasheet.fr  |   Italian : Alldatasheetit.com
Portuguese : Alldatasheetpt.com  |   Polish : Alldatasheet.pl  |   Vietnamese : Alldatasheet.vn
Indian : Alldatasheet.in  |   Mexican : Alldatasheet.com.mx  |   British : Alldatasheet.co.uk  |   New Zealand : Alldatasheet.co.nz
Family Site : ic2ic.com  |   icmetro.com